Max power (230V) | 5.5 kW |
Nominal power (230V) | 5.0 kW |
Max power (400V) | 5.5 kW |
Nominal power (400V) | 5.0 kW |
Engine power | 13 HP |
Engine start | Manual/electric |
Fuel type | Gasoline |
Engine model | KS 390 |
Outlets | 1х16A (400V), 1×32А (230V) |
Fuel tank volume | 25 l |
Crank case volume | 1.1 l |
Working time at 50% load | 17 h |
Net weight | 81.8 kg |
Voltage | 230/400 V |
Frequency | 50 Hz |
Only use the three-phase generator for three-phase consumers (400 V)!
The unique innovative VTS (Voltage transfer switch) phase switching system allows using the generator both in three-phase mode (400V) and in single-phase mode (230V) without loss of power! It is no longer necessary to purchase two separate generators and maintain them: just switch the mode and use the TM Könner & Söhnen generator with the phase switching system at the required voltage.
Possibility of welding inverter connection with maximum current up to 200 A* (in single phasemode).
* Only in case that the welding inverter has 85% efficiency and an arc voltage of 25 V.
Voltage, V | 230 / 400 |
Max/Nominal power (230V), kW | 5.5/5.0 |
Max/Nominal power (400V), kW | 5.5/5.0 |
Frequency | 50 Hz |
Strom, А (max) | 23.91/9.93 |
Sockets | 1х16A (400V), 1×32А (230V) |
Fuel tank volume, l | 25 |
Working time at 50% load, h | 17 |
LED display | Voltage in Volt, Frequency, Working hours |
Noise level Lpa/Lwa, dB | 70/95 |
Power output DC, V/А | 12/8.3 |
Engine model | KS 390 |
Engine type | Gasoline powered one-cylinder, four-stroke air-cooled |
Engine power, hp/kW | 13.0/9.56 |
Crank case volume, l | 1.1 |
Engine cylinder volume, cm3 | 389 |
Power output controller | Intelligent voltage stabilization system AVR |
Launch type | Manual/electric |
Power factor, cosφ | 1(230V)/0.8(400V) |
Net dimensions, mm | 680×545×550 |
Gross dimensions, mm | 700×545×590 |
Net weight, kg | 81.8 |
Gross weight, kg | 83.0 |
Protection class | IP23M |
EAN code | 4260405362264 |
Videos